Identificador: 1943
Abierta
PARTE: 12385 - SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
AMXmachinery
Descripción
PARTE: 12385 - SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
USADA - BUENAS CONDICIONES
54" Dia. Wheels with 6-1/2" Face
7" x 29'0" blade Size
Air Tensioning with Dial Adj. for Top Wheel
Self Centering Feed Works that can also be preset to a size
six 7" Dia. x 12" High Smooth Feed Rolls (Three Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw Blade
21" Max. Feed Roll Opening( 12" Outside Sawline, 9" Inside Sawline
Steel Weldment Roll Cradle with Chrome Plated Ways
Steel Weldment Feed Roll Brackets
45 Degree Tilt with In/Out Adj.
Electric Foot Switch for Opening Feed Rolls
7.5 HP Hyd. Power System with Air to Oil Cooler for Reversible Inf. Variable Feed Speeds from 50 to 300 FPM
2 Fluid Motors in Series (One for Each Set of Feed Rolls)
Operator Control Station with Feed Speed Control Dial and Forward, Stop, and Jog Reverse Pushbuttons
Band Saw Clean and Lube
Sawdust Pan Kit
Ambitec Short Stop Model Electric Brake
100HP Toshiba (440/3/60) Motor
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12582 – CHAFLANADORA -UNKNOWN
PARTE: 12582 – CHAFLANADORA -UNKNOWNUSADA – BUENAS CONDICIONES
AMXmachinery
FINGER JOINT AUTOMATICO
PARTE # 32M-AT620 - SISTEMA FINGER JOINT - AUTOMATICOFINGER JOINT DE OPERACION AUTOMATICACOMPOSICION DEL SISTEMA:1 MESA DE ALIMENTACION MOTORIZADA1 MESA DE ENTRADA MOTORIZADA1 PRENSA DE 5000 MM DE LONGITUD1 TROMPO DERECHO1 TROMPO IZQUIERDOREQUIERE SOLO DE 2 A 3 OPERADORES PARA SU TOTAL FUNCIONAMIENTOVIDEO DE LA MAQUINA FUNCIONANDO: VIDEO 1
AMXmachinery
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...