Identificador: 2290
Abierta
PARTE: 12530 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 4000 MM - EMME ELLE
AMXmachinery
Descripción
PARTE: 12530 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 4000 MM - EMME ELLE
Usada - Muy buenas condiciones
Modelo: T.O.2.4000
2 cuchillas, doble corte
Largo máximo de trabajo 4000mm
Hidráulica
Panel de control frontal EC9001
Año 2002
Normas CE
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12346 – LIJADORA BANDA ANCHA – 4 LIJAS - SUPERIOR E INFERIOR – 52” ANCHO - COSTA
PARTE: 12346 – LIJADORA BANDA ANCHA – 4 LIJAS - SUPERIOR E INFERIOR – 52” ANCHO - COSTA
USADA - BUENAS CONDICIONES
La
máquina se retiró trabajando en buenas condicionesWidth
Capacity: 53"Sanding
Belt Size: 53" x 103"Machine
#1Bottom
Head #1: ~10" Diameter Grooved Steel Drum, 47 HP, 460vBottom
Head #2: ~10" Grooved Rubber-Covered Contact Drum, 47 HPBottom
Head #3: ~10" Grooved Rubber-Covered Contact Drum, 32 HPBottom
Head #4: Finishing Platen, 23 HPMachine
#2Top Head
#...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246
PARTE: 12584 - TALADRO MULTIPLE – RITTER R246USADO - MUY BUENAS CONDICIONES(2) Bottom vertical drill heads, each with (23) gear driven spindles on 32 mm centers (24 RH and 22 LH rotation), (2) 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control. Equipped with: (4) Overhead adjustable pneumatic holddowns on each head, 72...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD
USADO - BUENAS CONDICIONES24" width cap. x 6"
thickness cap.Upper spring loaded staggered
hold down fingersTop/Bottom helical carbide
heads30HP; 3PH upper cutterhead
motorapprox 20HP; 3PH lower
cutterhead motor5HP; 3PH variable speed feed
motor with gear reducer1HP; 3PH platen elevation
motor56" central distance
between cutterheads4" solid steel power
driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...