Identificador: 2626
Abierta
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A
AMXmachinery
PARTE: 2EV-E1832 - RESISTENCIA - FILAMENTO PARA LAMPARA RADIANTE
PARTE: 2EV-E1832 - RESISTENCIA - FILAMENTO PARA LAMPARA RADIANTEPARTE: 2PO-24036 - RESISTENCIA - FILAMENTO PARA LAMPARA RADIANTENUEVAS Y ORIGINALES
240V, 36” LARGO
AMXmachinery
LIJADORA PARA CURVOS Y RECTOS BRUSA LT-80
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOSMARCA: BRUSAMODELO: LT-80PARA PULIR- PALO DE ESCOBA- REDONDOS- MANGO DE HERRAMIENTA- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm
AMXmachinery
CNC DRILL GLUE INSERT DOWEL MACHINE HOMAG WEEKE ABD 100
PART: 12063E – CNC DRILLING AND DOWEL INSERTING MACHINE – HOMAG WEEKE ABD 100USED – VERY GOOD CONDITIONSYEAR: 2010Weeke’s model ABD 100 is designed for small and large capacity horizontal drilling, gluing, and dowel insertion. The ABD 100 is produced by skilled technicians with a long tradition for excellence in engineering and machine building.The Model ABD 100 is built on a heavy-duty base with welded steel construction. The main horizontal beam of the machine holds the carriage ...