Identificador: 1565
Abierta
PARTE: 2EX-DCY - COLECTOR DE ASERRIN CON CICLON Y DESCARGADOR DE ASERRIN
AMXmachinery
Descripción
PARTE: 2EX-DCY-750 – COLECTOR DE ASERRIN CON CICLON Y DESCARGADOR ASERRIN – MOTOR 7.5 HP – 4850 CFM
PARTE: 2EX-DCY-1000 – COLECTOR DE ASERRIN CON CICLON Y DESCARGADOR ASERRIN – MOTOR 10 HP – 6400 CFM
Nuevo con garantía
Magnetic starter included
|
2EX-DCY-750
|
2EX-DCY-1000
|
|
|
Horsepower |
7.5 HP |
10 HP |
|
Filter Bags |
2 |
2 |
|
Phase |
Three |
Three |
|
CFM |
4850 |
6400 |
|
Amps @ Voltage |
21A @ 220V |
28A @ 220V |
|
Inlet Size |
12" |
13" |
|
Filter Area (sq. ft.) |
117 |
117 |
|
Storage Capacity (cu. ft.) |
24 |
32 |
|
Fan RPM |
3450 |
3450 |
|
Fan Size |
14.75" |
16" |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOS
PARTE: 2MK-FLEX - ENCHAPADORA DE
CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOSNUEVA CON GARANTIAGlue: Granulated Hot-Melt Low TemperatureGlue Temperature: 130º to 180º CTape height: 0-35/64” to 1-57/64”Tape thickness: 0.3 mm - 1 mmFeeder speed: 0 to 19 ft/minPower: 700 WMotor: 1 PhaseVolts/Amps: 127 V - 5,5 A or 220 V - 2,5 AWeight: 21 LbsPerfect for bonding edge tapes to curved pieces.The hand-held is perfect to applying edgebanding to concave and convex curved pieces. It works with...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONS
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”. Angúlo máximo 35°
AMXmachinery
REDUCTOR DE VELOCIDAD - 1 HP - 30.1
PARTE: AMX-10150 - REDUCTOR DE VELOCIDAD - 1 HP - 30.1
USADO - BUENAS CONDICIONES
MOTOR 1
HP, 208-230/460V, 3.6/3.6 AMP
MAX
OUTPUT TORQUE: 1260 LBS
GEAR
RATIO: 30.1
MAX INPUT
HP 1.5 AT 1750 RPM
TYPE: QC
US ELECTRICAL MOTORS
MEDIDAS: 17” LARGO X 9” FONDO X 9”
ALTO