Identificador: 859
Abierta
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
AMXmachinery
Descripción
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
Used - Excellent conditions – Used for samples only
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
Saw harbor 5/8"
Dust exits 2 of 4" diameter, requres aprox. 850 CFM
Air use 72 CFM at 65 PSI based in 15 cycles/min
Table height 36-1/8" (917 mm)
Pneumatic pedal
Each cut takes 4 to 6 seconds
Weight 405 lbs (184 kg)
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SECANTE DE MADERA - CAPACIDAD 40,000 PT
PARTE:
12297 - SECANTE DE MADERA - CAPACIDAD 40,000 PT
Usado
Completo
Caldera de Lena marca MIRGO 150 HP
AMXmachinery
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
Usado - Buenas CondicionesStretch
Slow Speed60
HP Motor
Control
Panel
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR – TRI STATE
PARTE: 12225 – SIERRA CINTA – VILANTES 36” – CON ALIMENTADOR
– TRI STATE
USADA – MUY BUENAS CONDICIONES
8,500 PPM
blade 2”
max.17’4”,
8”max. material
width, variable speed feed works 6’x6’ rolls
Motor principal: 20 HP, 230/460 V, 3 PH
Alimentador: ½ HP