Identificador: 1043
Abierta
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
AMXmachinery
Descripción
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USAR
PARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)
VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989
MANUAL DEL USUARIO INCLUIDO
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CABEZAL Y CUCHLLAS BASTONERA
PARTE # 2TA-DM77-1 - CABEZAL PARA BASTONERA 2TA-DM77PARTE # 2TA-DM77-2 - SET DE 2 NAVAJAS PARA BASTONERA 2TA-DM77
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-VAC481 – PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
Nueva con garantíaFeatures:Special design for using heating
and vacuum pressure to add form or film skin to a shaped, curved or uneven
surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC
sheets.Automatic controlled by PLC for
suitable and easy operation.Double-layer and fully sealed
heat preservation.Advance heating temperature
digital control by computer for the best adjus...
AMXmachinery
COMPRESOR DE TORNILLO – 5 HP – GARDNER DENVER
PARTE: 12301 – COMPRESOR DE
TORNILLO – 5 HP – GARDNER DENVER
USADO - BUENAS CONDICIONES
460V,
3 PH. 5 HP
Total
running hrs. 227
Machine
type L05
Tested
good