Identificador: 1178
Abierta
Descripción
PARTE: 2AA-8-MARK-II - SIERRA CINTA – CAPACIDAD 28” – AMADA
NUEVA CON GARANTIA
SPECIFICATIONS & FEATURES
Rectangular Capacity Standard Capacity M6 High Column Capacity (Optional)
Blade at 90° 18” x 22” (457 mm x 560 mm) 18” x 28” (457 mm x 711 mm)
Blade at 45° 18” x 12.75” (457 mm x 324 mm) 18” x 17” (457 mm x 432 mm)
Speed Range
50 – 450 fpm (15 – 137 m/min) infinitely variable speed drive system.
Front-Mounted Speed Control
Allows blade speed to be adjusted from operator’s control station.
Feed Range
0 – 140 lbs. (64 kgf) infinitely variable direct reading scale balance beam.
T-Slotted Work Table
Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts.
Miter Cutting
Column and blade tilt up to 45° right and left of vertical; work always stationary. Built-in protractor.
Quick-Action Vise
Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
Saw Feed Stops
Adjustable stops can be pre-set to stop advance of the saw head and return of blade and to stop motor at any location within the 18” (457 mm) travel of the blade.
Coolant System
Built in with Flood system, available with added optional drop lubrication system. (Requires compressed air connection - Option Code ML2). Controlled by on-off selector switch at operator’s station. Tank capacity 21 gallons (79 liters).
Flushing Hose
Washes chips from hard-to-get-at places reducing clean-up time.
Power Chip Brush
Together with blade wipers and flood coolant keep blade teeth free of chips.
Carbide Guide System
Guides are stationary and can be rotated to present new guiding surface to the blade. Upper and lower guides have preloaded carbide-faced back-up blocks to support back edge of the blade.
Blade
14' 6" (4420 mm) long x 1" (25 mm) wide, .035" (89 mm) thick. One Welded-Edge Band Blade is furnished with each machine.
Motors
Main; 5 H.P. (3.75 kW), 1800 RPM, totally enclosed fan cooled. Coolant Pump; 1/8 H.P. (.1 kW) totally enclosed motor-built-in integrally. Available voltage: 208-volt, 230 volt, 460, 3-phase.
Controls
IEC fused disconnect switch and magnetic motor starters, with overload and low voltage
protection. Disconnect is NFPA79 compliant. Transformer provides low voltage control
(120 Volts) to all push buttons at operator’s control panel and machine lighting circuits.
Electrical and control components mounted in a NEMA 12 compartment. Electrical
Panel is UL labeled #E56388.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
ENGOMADORA DE 54”
PARTE: 11753 - ENGOMADORA DE 54”
3 - ENGOMADORA DE 54”. ENGOMADORA MARCA IND. G.H.
ACCIONADA POR 2 RODILLOS DE 50” DE LARGO Y 7 ½” DE DIAMETRO, CON ELEVADOR
OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y ELECTRICA,
CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5 PULGADAS DE GROSOR
CON UNA CAPACIDAD DE PROCESO DE 110 PIES POR MINUTO, MOTOR DE 5 HP Y
MOTORREDUCTOR DE 2.5 HP
AMXmachinery
SISTEMA DE PINTURA - MONTAJE EN CARRO
SISTEMA DE PINTURA - MONTAJE EN CARROSISTEMA PARA APLICACION EN MADERAAplicación de tintes, sellantes, lacas y capas finales para:• Muebles y armarios de madera• Ventanas y puertas de madera• Madera personalizada Uso de una amplia gama de tecnologías:• Convencional• HVLP (alto volumen a baja presión)• Compliant• Pulverización electrostática con aire MODELOS DISPONIBLES DE BOMBA, MANGUERAS Y PISTOLA MODELOS:• 289638 – con Pistola AirPro HVLP, boquilla de 1,0 mm (0,040 ...
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
TORNO DESENROLLADOR - ANCHO 54”
PARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”
1 - TORNO DE DESENROLLO DE 54 PULGADAS (4 PIES) SEMI-AUTOMATICO
MARCA IND. G.H. PARA DESENROLLAR TROCERIA DE 4 PIES DE LARGO Y DIAMETRO DE 25
PULG. MAXIMO GROSOR DE .08 HASTA 5.MM ACCIONADO CON CADENAS DE AVANCE Y MOTORES
DE 5,10,15 HP CON CAPACIDAD DE 30 TONELADAS DE DESENROLLO DIARIAS.