Identificador: 330
Abierta
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
PARTE: 2TA-SET-TRANS –
MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA
Nueva
con garantíaDiseñada
a la medida para transferir material continuamente entre 2 espigadoras dobles
de cadenaTableros,
puertas, etc.
Aumenta
la eficiencia y disminuye o elimina los manejos manuales
Video: https://vimeo.com/639803360
AMXmachinery
SIERRA CINTA 37"
PARTE # M-2CA-HB950A – SIERRA CINTA / REASERRADORA - VOLANTES 37” - MOTOR 10 HP – MESA INCLINABLENueva con garantíaDiámetro volantes 37”Ancho del volante: 2″Tamaño mesa: 45-1/4” x 31-1/2″Mesa inclinable: 0°~45°Capacidad de altura: 22″Velocidad de la sierra: 5500 FPMLongitud de la sierra: 259” – 261″Ancho de la sierra: 1/4″~2″Motor: 10HP, 220V, 3 fasesPeso: 2046 lb.Tamaño de la maquina: (L*W*H) 63.75″ x 32.7″ x 113.4″
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1.5 HP - DAYTON MODEL: 3AA23B # 2
PARTE:
AMX-10082 - EXTRACTOR DE TURBINA - MOTOR 1.5 HP - DAYTON MODEL: 3AA23B
USADO - BUENAS CONDICIONES
FUME EXHAUSTER
EXTRACTOR DE VAPORES
MOTOR 1.5 HP, 230/460V, 3 FASES
4.2 AMP
60 HZ
DAYTON, MODEL: 3AA23B
MEDIDAS: 20” ANCHO X 22” LARGO X 29” ALTO
ENTRADA 6”
SALIDA 6”
Model features steel frame,
steel impeller in fiberglass housing, and intake screen
6,500.00 MXN
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.5 - 5.0 MM
PARTE # 3NN-VENEERPLUSG2 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integrado Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.5 ~ 5.0 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：approx. 8 ~ 45 m/min. (depending on veneer strip thickness)Electric Power：approx. 10.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1500 mmDimensions (L x W x H)：2550 x 2100 x 1600 mmNe...