Identificador: 327
Abierta
Descripción
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM
NUEVA CON GARANTIA
Heavy duty construction provides vibration free operation. Easy to set up and adjust.
Manual raise, lower and tilt of main blade and scoring saw.
Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.
Sealed main shaft bearings (lubricated for life) with vibration dampening system.
Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.
Specially designed roller carriage, utilizing aluminum pro files for lighter weight.
Stable, torsion free cross slides with low resistance swinging support arm.
Extra attention paid to the sliding table mechanism, ensuring absolute rigidity of the entire sliding assembly.
Base welded from cold, rolled heavy gauge steel plate, providing a rugged assembly and long term accuracy of the entire machine.
Industrial grade, high power rated motor for long life and heavy duty performance.
Telescoping cross cut fence, extendable to the full 63” stroke of the sliding table. Fence can be utilized for up to 45 degree miter cutting.
All painted surfaces with special heavy grade priming and finish for long term protection.
All none painted aluminum surfaces, anodized
SPECIFICATIONS | LB-TS-P1600MA | LB-TS-P2500MA | LB-TS-P3200MA |
Sliding Carriage Dimensions | 63" x 14" | 98" x 13" | 126" x 13" |
Max. Cutting Length | 63" | 98" | 122" |
Ripping Capacity | 49" | 49" | 49" |
Saw Blade Inclination | 90° ~ 45° | 90° ~ 45° | 90° ~ 45° |
Maximum Depth of Cut at 90° | 3.3" | 3.3" | 3.3" |
Maximum Depth of Cut at 45° | 2.6" | 2.6" | 2.6" |
Main Saw Maximum Blade Dia. | 14" | 14" | 14" |
Saw Blade Shaft Dia. | 30 MM | 31 MM | 32 MM |
Blade Rotation Speed (RPM) | 2800/4000/5600 | 2800/4000/5600 | 2800/4000/5600 |
Saw Blade Motor Power | 5 HP | 5 HP | 7.5 HP |
Scoring Saw Blade Dia. | 125 MM | 125 MM | 125 MM |
Saw Blade Shaft Dia. | 20 MM | 20 MM | 20 MM |
Blade Rotation Speed (RPM) | 8000 | 8000 | 8000 |
Scoring Motor Power | 1 HP | 1 HP | 1 HP |
Saw Up & Down, Tilting Motor | MANUAL | MANUAL | MANUAL |
Power | 220V 3PH | 220V 3PH | 220V 3PH |
N.W. | 960 LBS | 1650 LBS | 1800 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO COPIADOR CON NAVAJA TRASERA – GOODSPEED 1240A
PARTE: 12166 – TORNO COPIADOR CON NAVAJA TRASERA – GOODSPEED
1240A
USADO
– EN BUENAS CONDICIONES
CAPACIDAD LARGO: 4” – 44”
CAPACIDAD DIAMETRO: 1/2” – 4”
MOTOR PRINCIPAL: 7-1/2 HP, 3 FASES,
60 HZ, 1800-3200 RPM
MOTOR BOMBA HIDRAULICA: 3 HP
CAPACIDAD DE PRODUCCION:
4
- 7 PIEZAS/MIN PARA 24”
3 – 5 PIEZAS/MIN PARA 35”
2 – 3 PIEZAS/MIN PARA 44”
PESO CON EMPAQUE: 6700 LBS
ELECTRICOS:
208V, 3 FASES
* ENVIENOS EMAIL PARA
RECIBIR TO...
AMXmachinery
COMPRESOR PISTON - MOTOR 10 HP
PARTE: 1SL-DC-10H500 – COMPRESOR DE PISTON HORIZONTAL – MOTOR 10 HP – 500 LTSNUEVO CON GARANTIACompresor de 10 HP Horizontal Tanque: 500 Litros Cabezal Marca FIAC Con guarda bandas Base en fierro colado, Cabezal en Aluminio y Cilindro en fierro colado DESPLAZAMIENTO: 40 CFM, 32 ACFM EFICIENCIA VOLUMETRICA 80% PRESIÓN MÁXIMA: 175 PSIG, 12 BAR Tiempo de llenado 4' 14" 1280 RPM Nivel sonoro 80 MOTOR 10HP, 7.5 KW, 120V, 3PH, 60HZ Conexión de descar...
AMXmachinery
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
USADO BUENAS CONDICIONES
AMXmachinery
COMPRESOR DE TORNILLO – 5 HP – GARDNER DENVER
PARTE: 12301 – COMPRESOR DE
TORNILLO – 5 HP – GARDNER DENVER
USADO - BUENAS CONDICIONES
460V,
3 PH. 5 HP
Total
running hrs. 227
Machine
type L05
Tested
good