Identificador: 1794
Abierta
Descripción
PARTE: 2CK-131HM
MAIN FRAME, MACHINE BED & ENCLOSURE
- 1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration
- 43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head end
- All Bedplates, Tables and Fences are Hard Chromed
- Lift up sound and safety Enclosure including safety interlocks and good lighting
DRIVE INCLUDES
- Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
- Powered rise and fall to extra heavy duty feed support beam by 3/4 hp.
- Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for the best, most rigid upper beam support.
- All top feed rolls and pressure elements rise & fall with the top beam. Safety switches are included at extreme points
- 6 Top Driven Full Width Feed Rolls
- All Top Rolls are air tensioned with 3 Stage Pressure Setting of Feed Rolls. This compensates for large variances in work piece thickness.
- Top Steel feed rolls are hardened and chromed to resist wear and to prevent chips & shavings from sticking to them
- 4 Driven Bottom Rolls – all full width. All are Cardan Shaft drive
- Infinitely variable feed speeds with inverter and feed speed LED display 20 – 165 FPM
(6 – 36 m/min) Feed motor power 10 hp - Feed roll diameter 5.5” / 140mm
SPINDLE ASSEMBLY
- Spindle is Standard 3200 RPM and belt driven (other RPM’s – optional – no charge)
- 50mm diameter spindle with 70mm OD with Dble Keys – Gang Sleeve
- Spindles are manufactured from SCM-439 tool steel (Imported from Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with 2 pairs of NSK-RHP ABEC 7 Duplex Super high precision high speed Bearings to provide the best in cutting stability with permanent accuracy. Spindle Tolerance is guaranteed to +/-0.002mm / 0.00007” accuracy. They are permanent grease lubricated and are labyrinth sealed to prevent against dust and water.
- Hydro-Loc Quick change Outboard Bearing Assembly on end of the shaft
- Electric Height Adjustment of spindle from front – Easy to operate station
|
|
Std. HP |
Swing |
Hood Size |
|
Bottom Spindle |
75 HP |
10″ |
7.9″ (200mm) |
|
Note: Larger or smaller HPs available |
|||
CHIPBREAKERS, FENCES & HOLDOWNS/HOLDOVERS, ETC.
- Tables, Bedplates, Pressure Plate and Fence is Hard Chromed
MISCELLANEOUS features and inclusions
- Centralized lubrication system to all main slides
- Dust Hood
- Toolkit, Instruction and maintenance manual, electrical diagram and parts list
ELECTRICAL
- TECO-Westinghouse or Siemens – Electric Motors – excellent quality & heavy duty
- Limit switch at infeed to prevent feeding oversized material and double ups
- I.E.C. – Telemecanique-Square D Electrics meet or exceed UL/CSA Standards
- Machines are equipped with Wye-Delta Soft Starters, main disconnect, multiple E Stops and 230/460 or 575/3/60 electrics.
|
Thickness Material |
.4” to 2.25” Note – to .25” thick and/or to thicker is optional |
|
Width Material |
12.2” – between outside blades |
|
Minimum Length Material: |
7.8” (200mm) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS
PARTE: 2CK-C372Is perfect for any small to mid-sized shops looking to achieve outstanding results. Its robust construction is the best in its class and provides superior sanding results. The flexibility with quick change abrasive belts, allow for more applications in a shorter time frame, helping to assist and meet deadlines. Has a relatively small footprint providing greater access for smaller shops to accomplish bigger results. Equipped with motorized thickness adjustment with digital inpu...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 PULGADAS
PARTE: 2TA-WG-1502H - ASTILLADORA - HORIZONTAL - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
AMXmachinery1
DOBLADORA DE METAL 5' X 3/16''
DOBLADORA DE METAL 5' X 3/16'' PARTE: 2GM-05316EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...