Identificador: 1248
Abierta
Descripción
PARTE # RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4 HP Spindle Drive Motor, TEFC
60″ Back Fence Assembly
(1) 13-Vertical Gear Driven Spindle Rows
10mm Bored Collets
(7) Right Hand, (6) Left Hand
(2) Index Pins
20″ X 48″ Work Table Surface
Wired 1-Phase 120 Volt, 60 Hz.
Manually Actuated Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 44″ and 508 Lbs
Designed and Manufactured in the USA
The starting point for our line boring machines, this unit is both affordable and built to last. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
SIERRA - RIP SAW - MATTISON
PARTE:
12397 - SIERRA - RIP SAW - MATTISON
USADA - BUENAS
CONDICIONES
Limpiada y Revisada Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual
Hand-Crank
Spindle
Speed: 3,600 RPM
AMXmachinery
PARTE: 12497 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 12” DIAMETRO - PISTORIUS
PARTE: 12497 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 12”
DIAMETRO - PISTORIUS
USADA - BUENAS CONDICIONES
2 MOTORES DE 1 1/2 HP 3450 RPM
SIERRAS DE 12"
PEDAL NEUMÁTICO
VARIADOR DE VELOCIDAD DE CORTE
VOLTAJE
208-230/460
AMXmachinery
MESA DESLIZABLE PARA TROMPOS
PARTE # 2BF-SK-28901 - MESA DESLIZABLE PARA TROMPOSLARGO DE VIAJE: 510 MM (20-1/2")LARGO DEL RIEL: 800 MM (31-1/2")