Identificador: 1665
Abierta
Descripción
PARTE: 2JG-MAG-SYSTEM46 - TALADRO MULTIPLE - 46 DOBLE FILA
Provides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm).
- Front end adjustment for quick and easy set-up.
- (2) 1.5 HP 2,800 RPM motors; max.
- Boring depth is 2-1/16" (55 mm).
- Side depth counter system; extractable 400 mm support rollers for long panels.
- Maximum distance between heads is 25-19/32" (650 mm) and minimum width is 5-1/8" (130 mm).
- Complete with: 46 quick change chucks, 10' extension fence with (4) flip-stops and (2) pneumatic reference pins; (6) patented safety clamps
- This machine can be used for single or double row line drilling.
- Uses 24 LH (red) and 22 RH (black) boring bits.
- Working air pressure 94 psi.
- Voltage: 230V 3-Phase
- Net weight: 820 lbs.; Crated weight: 940 lbs.
- Call for LTL Freight pricing outside the Continental United States at 919-776-8341.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 12500 - SIERRA MULTIPLE – MEREEN JOHNSON – 50 HP
PARTE:
12500 - SIERRA MULTIPLE – MEREEN JOHNSON – 50 HP
USADA – MUY BUENAS CONDICIONES
Incluye:
Sierra Multiple
Volteador
Linea de corte con 6 cortadores rapidos
3 maquinas Industrial 18”
3 maquinas Irvington 16”
AMXmachinery1
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICOAUTO INFEED
TABLE
Length
900mm (35.4”)
Width
600mm (23.6”)
Infeed
Table½ HP (3Ph) x 2
AUTO FINGER SHAPER – LEFT
Table Size
600mm (23.6”)
Length
150~900mm (5.9” ~ 35.4”)
Width
20~60mm (0.78” ~ 2.36”)
Thickness
20~160mm (0.78” ~ 6.3...
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
AMXmachinery1
PARTE: 2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
PARTE:
2CK-HR400PB - REASERRADORA HORIZONTAL - 1 BANDA – REGRESADORA - 30 HP – 15-3/4” ANCHO
NUEVA CON GARANTIACapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise thic...