Identificador: 2570
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 20'' x 80'' PARTE: 2GM-GML-2080
Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 80" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | M.T. #7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2TA-GS-24RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 24”
PARTE: 2TA-GS-24RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 24”
Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
AMXmachinery1
SIERRA RADIAL - JUNIOR 800CE
PARTE: 2JG-MAG-BIG800CE - SIERRA RADIAL - JUNIOR 800CEOffer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity (Not included)30 mm Arbor diameter73.23" x 45.08" ...