PARTE: 2CK-GT610HIIs capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out.  The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller fe...

PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out.  The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal.  The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...

PARTE: 2CK-GT635ARDHas a robust cast-iron body for industrial planing day in and day out.  The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal.  The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...

PARTE: 2CK-CM626Is a production planer with high horsepower and feed rates.   It is equipped with our spiral insert knife cutterhead with two sided replaceable knives which produce a smooth planed finish with maximum cutting depth. With upper and lower driven feed rollers can plane even the most difficult to feed material.  The powerful 20HP motor can ensure optimum stock removal even on full width boards.  With infinitely variable feeds the operator has full control to ensure the optimum fe...

PARTE: 2CK-P815HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...

PARTE: 2CK-P630HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...

PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...

PARTE: 2CK-P20HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration.  The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life.  When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge.  Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...

PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration.  The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life.  When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge.  Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...

PARTE: 12337 - CEPILLO 1 CARA - CAPACIDAD 20” USADO - BUENAS CONDICIONES 8.4 HP w/ Tersa style cutter-head, variable speed sectional infeed, approx. 10″ of thickness capacity, motorized bed height adjustable with digital readout, sectional chipbreaker, 6″dust collection port, w/ ProScale readout.

PARTE: 12336 - CEPILLO 1 CARA - CAPACIDAD 18” USADO - BUENAS CONDICIONES 7 1/2-HP 230 Volt 3-Phase 3 Knife Straight Cutter Head All 5 belts have been changed Machine has been cleaned, sanded, primered & painted

PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30” USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics Standard Specifications: - 32-3/8" wide x (3/8” to 6") thickness work-piece capacity - 13” minimum length x 2” minimum width work-piece - 50 HP, 230/460/3 top head motor - 50 HP, 230/460/3 bottom head motor - 6” diameter, 5,000 RPM solid steel cutterheads - Helical cutterheads with insert style knives - 10 HP 15 HP inverter-controlled feed motor, (30 to 80 ft/min...

PARTE: 12334 - CEPILLO 2 CARAS - CAPACIDAD 24” USADO - BUENAS CONDICIONES Standard Specifications: - 24" x 6" work piece capacity - 12" min. length, (6" min. butted) x 1/4" min. thickness - 30 HP upper cutter head motor, 20 HP lower head motor - Whisper helical carbide cutterhead, (1/2" max. depth of cut) - 1 HP platen/thickness elevator motor - 5 HP variable speed feed motor, (25 to 100 ft/min. feed speed) - 2" concentric chipbreakers with pressure rollers ...

PARTE: 12333 - CEPILLO 1 CARA - CAPACIDAD 24” USADO - BUENAS CONDICIONES NAVAJAS RECTAS 3 FASES

PARTE: 12332 - CEPILLO 4 CARAS - CAPACIDAD 17.5” ANCHO USADO - MUY BUENAS CONDICIONES Capacidad 450 mm x 200 mm 4 portaherramientas Altura superior 200 mm Cepilladora alta y baja 10 - 10 HP Cepilladora verticales 7.5 - 7.5 HP  Medidas de la Maquina : Largo 2730 mm x ancho 1470 mm x alto 1500 mm Peso incluido el embalaje  2500 Kg  

PARTE: 12330 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” USADO - BUENAS CONDICIONES

PARTE: 12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD USADO - BUENAS CONDICIONES24" width cap. x 6" thickness cap.Upper spring loaded staggered hold down fingersTop/Bottom helical carbide heads30HP; 3PH upper cutterhead motorapprox 20HP; 3PH lower cutterhead motor5HP; 3PH variable speed feed motor with gear reducer1HP; 3PH platen elevation motor56" central distance between cutterheads4" solid steel power driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...

PARTE: 12328 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO USADO - BUENAS CONDICIONESFeatures gang rip and side head capabilities.  Additional technical specifications include... Planing & sawing width 24" maxThickness max. 4"Min. 1/2" Top Head: 4 knives 1/8" x 1-1/4" x 25"18 HP motorSpeed 5500 RPM5-1/4" cutting circle3/8" max chip removal7/8" profile depth max.8" dia. dust hood Bottom Head: 4 knives1/8" x 1-1/4" x 25"12 HP motor5500 RPM5-1/4" cutting circle3/8" max. chip removal...

PARTE: 2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL Nuevo con garantía230/1/60 electrics - 1 Fase 230/3/60 electrics) - 3 Fases DESCRIPTION SPECIFICATION Maximum planing width 20″ Maximum planing thickness 8-5/8″ Feed speeds (2) 20 & 30 FPM Main motor 5 HP Cutterhead diameter 3-1/...

PARTE: 12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA USADO – MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420 mmHauteur min/max. Travail 11 - 300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11 kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2 kWVitesse d avance 3-30 m/minDiametre rouleaux avancement 90 mmDrag upper number 3Transmission Type Ca...