Identificador: 2574
Abierta
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 3''
Fully equipped with a 3" die set to roll metal square tube into rings. Perfect solution for any fabrication shop looking to speed up the manual process. These metal roller benders are popular amongst the metal fence manufacturing, green house manufacturing, roll cage fab shops, and welding fab shops.
- ISO 9001 certified
- Hydraulic top roller positioning with digital readout
- Max capacity: 4” tube and 3-1/2” pipe
- Heavy Duty 5-1/2HP AC main motor
- Heavy welded all steel construction
- Quiet compact hydraulic system
- Custom-made rollers are available per request, such as steel, nylon, etc.
- One year industrial warranty for parts
- One set of universal combination rollers can do most works except pipes & round tubes (will need special dies)
- Foot pedal
| Dia. of Roller | 8 1/2" |
| Dia. of Roller Shaft | 3" |
| Roller Speed | 16 RPM |
| Motor | 5-1/2" HP, 220V/440V, 3 Phase |
| Dimiensions | 51" x 45" x 72" |
| Weight (with top roller hydraulic positioning) | 2,450 lbs. |
| Oil Capacity | 28L =8 Gal |
| 34T-PRB-75H | ROLL SET FOR 3/4 INCH TUBING FOR GMC PRB-75H |
| 1T-PRB-75H | ROLL SET FOR 1 INCH TUBING FOR GMC PRB-75H |
| 114T-PRB-75H | ROLL SET FOR 1-1/4 INCH TUBING FOR GMC PRB-75H |
| 112T-PRB-75H | ROLL SET FOR 1-1/2 INCH TUBING FOR GMC PRB-75H |
| 2T-PRB-75H | ROLL SET FOR 2 INCH TUBING FOR GMC PRB-75H |
212T-PRB-75H
3T-PRB-75H | ROLL SET FOR 2-1/2 INCH TUBING FOR GMC PRB-75H
ROLL SET FOR 3 INCH TUBING FOR GMC PRB-75H |
| 34P-PRB-75H | ROLL SET FOR 3/4 INCH PIPE FOR GMC PRB-75H |
| 1P-PRB-75H | ROLL SET FOR 1 INCH PIPE FOR GMC PRB-75H |
| 114P-PRB-75H | ROLL SET FOR 1-1/4 INCH PIPE FOR GMC PRB-75H |
| 112P-PRB-75H | ROLL SET FOR 1-1/2 INCH PIPE FOR GMC PRB-75H |
| 2P-PRB-75H | ROLL SET FOR 2 INCH PIPE FOR GMC PRB-75H |
212P-PRB-75H
3P-PRB-75H | ROLL SET FOR 2-1/2 INCH PIPE FOR GMC PRB-75H
ROLL SET FOR 3 INCH PIPE FOR GMC PRB-75H |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
PARTE: 2CK- LMC-418S - MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
SPECIFICATIONS
Thickness of material
¼” to 5”
Width of material
.6” to 8”
Min lenght of material
8” (butt fed)
Feed speeds to
20 – 85 FPM (6 – 25 MPM)
Axial Adjust (side heads)
.8” (20mm)
Axial Adjust
(top/b...
-500x500.png)
AMXmachinery1
TORNO 16'' X 60''
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD16” x 60”, 2-1/16” bore, 6 HPISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without ch...
-500x500.png)
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...