Identificador: 2545
Abierta
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12
Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliability, ensuring consistent performance year after year. With its pioneering technology, this system delivers exceptional value, redefining industry standards in terms of both performance and return on investment, establishing itself as a constant catalyst for innovation in the wood industry.
- Excellent return on investment
- Fully automatic operation for short workpieces with high speed and throughput
- Only two operators are needed for maximum production
- Servo motor drive provides a production rate of up to 2~3 cycles/min
- Workpieces automatically travel between profiling and the gluing station
- As standard PVAc glue is used, but there are optional gluing systems for PUR, MUF, EPI, etc. available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Designed for 2~300 mm (0.079~11.8”) wood length
- The three initial F-I01 hand feeding tables automatically carry workpieces, allowing for continuous infeed by operator
- The F-C31 finger shaper performs scoring, trimming, shaping, and gluing on both ends of the workpiece
- The workpieces feed directly onto the F-D01 automatic feeding table, where workpieces are automatically turned over from vertical to horizontal by a brush wheel
- Synchronized jointing and length cutting is performed in a 2-step process within the F-A08 Assembly Press– the standard jointing length is 14 feet
F-I02 Hand Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Feed drive motor | 1 HP x3 |
Machine dimensions (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39“) |
Packing dimensions (L x W x H) | 3300 x 970 x 1070 mm (130 x 39 x 43“) |
F-D01-12 Automatic Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Range of material length | 150~1000 mm (5.9”~39.4“) |
Range of material width | 30~160 mm (1.2~6.3“) |
Motor | 1 HP |
Brush wheel drive motor | 1/8 HP |
Machine dimensions (L x W x H) | 1440 x 2660 x 1330 mm (57 x 105 x 53“) |
Packing dimensions (L x W x H) | 1540 x 2760 x 1430 mm (61 x 109 x 57“) |
F-C31 Automatic Finger Shaper – Right End
DESCRIPTION | SPECIFICATION |
Max. available width working table | 650 mm (25.6”) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
FRENO PARA DOBLADORA DE METAL
FRENO PARA DOBLADORA DE METAL PARYE: 2GM-SB-1014ISO 9002 certifiedLarge 3” beam opening, adjustable1” beam adjustment (front and back)Stop rods for repeat bends(2) counter weightsAll steel heavy body construction with extra heavy tie rod for minimum deflectionBending Capacity: Mild Steel14 Ga.Bending Capacity: Stainless Steel18 Ga.Bending Length Capacity10'Bending Angle Degree0-135°Beam adjustment, front and back1"Minimum reverse bend5/16"Manual clampingSt...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 PULGADAS
PARTE: 2TA-WG-2502H - ASTILLADORA - HORIZONTAL - 24 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
AMXmachinery1
TALADRO MULTIPLE - 46 DOBLE FILA
PARTE: 2JG-MAG-SYSTEM46 - TALADRO MULTIPLE - 46 DOBLE FILAProvides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm).Front end adjustment for quick and easy set-up.(2) 1.5 HP 2,800 RPM motors; max.Boring depth is 2-1/16" (55 mm).Side depth counter system; extractable 400 mm support rollers for long panels.Maximum distance between heads is 25-19/32" (650 mm) and minimum width is 5-1/8" (130 mm).Complete with: 46 quick cha...
AMXmachinery1
DOBLADORA DE METAL 4' X 1/4''
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-HBR-04254 foot plate rolls are made for bending and rolling 1/4" metal sheets or plates into cones and other cylindrical shapes. All three rolls are hydraulic driven, hardened, and made of high grade alloy steel. Equipped with a cone attachment, LED digital readout, operation pedal controls safety line, and a quiet hydraulic system.ISO 9001 certifiedTaiwan Machines All three rollers are drivenAll three rollers are ha...