ID: 2547
Open
.PNG)
Description
FINGER JOINT SEMI AUTOMATICA PARTE: 2CK-FL14
Represents a state-of-the-art finger jointing production line, meticulously crafted to transform extra short wood waste into valuable materials, all the while upholding an exceptional balance between performance and cost-effectiveness. Its compact design with multiple automatic features and options makes it an ideal solution for a small sized finger jointing operation. By utilizing a solitary shaper setup, this system delivers extraordinary value in performance and affordability, positioning it as an enduring revolutionary force within the woodworking sector.
- Semi-automatic finger jointer with a small footprint
- Excellent performance-to-cost ratio
- Right/left finger shaper scores, profiles, and glues both right and left joints in a single machine
- Workpieces automatically travel between profiling & gluing stations
- Production speed: 2~3 cycles/min
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy with a finished board tolerance of 0 to 0.08” (0 to 2mm)
- Manual rotary table design turns pieces to allow processing of both ends on a single shaper system – optional automatic rotary table available
- Optional automatic adjustment of the scoring blades and shaper section for left & right profiles
- Presses available in various lengths to suit your production needs
- Applicable for machining extra short wood waste of 4” (100mm)
- Only two operators required for max production
- Hopper loader mounted for workpieces to automatically feed into the assembly press comes standard with the FL-24
- As standard we use PVAc glue, but we have optional gluing systems for PUR, MUF, EPI, etc. available upon request
- Synchronized jointing and length cutting is performed in a 2-step process within the F-A05 or A07 single stage automatic infeed finger assembler
Includes the following:
F-C03W01 Finger Shaper (Injection Glue System)
DESCRIPTION | |
Max. available width working table | 650 mm (25.6”) |
Range of workpiece length | 100~1000 mm (4.7~27.5”) |
Range of workpiece width | 20~60 mm (3.9~39.4”) |
Range of workpiece thickness | 30~160 mm (1.2~6.3”) |
Trimming saw speed | 2800/3400 RPM |
Finger cutter speed | 6000 RPM |
Finger cutter diameter (in/out) | ø70 / ø160 mm (ø2.8 / ø6.3) |
Dust out diameter | 6 x 2” |
Machine dimensions (L x W x H) | 4425 x 1815 x 1855 mm (175 x 72 x 73”) |
POWER REQUIRED | |
Table-drive motor (Infeed & Outfeed) | 1/2 HP x2 |
For conveyor motor | 1/2 HP x2 |
Scoring saw motor (Top & Bottom) | 2 HP |
Trimming saw motor | 5 HP |
Shaper cutter motor | 15 HP |
* 1: Injection type glue applicator – using PVAc glue only
* 2: Finger cutters – 10 pieces
* 3: Comes with saw blades
F-D06-1.4 Roller Table
DESCRIPTION | |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
ASTILLADORA - VERTICAL - 15 X 4 PULGADAS
PARTE: 2TA-WG-1504V - ASTILLADORA - VERTICAL - 15 X 4 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutti...
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
AMXmachinery1
PARTE: 2CK-DWM-36 - ARMADORA DE CAJONES
PARTE:
2CK-DWM-36 - ARMADORA DE CAJONESQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the bottom ...
AMXmachinery1
SIERRA DE BANCO - 14 PULGADAS 10 HP
PARTE: 2CK-TA1214Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado ar...