Identificador: 1519
Abierta
Descripción
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTY
With 2′ digital readout control panel
Hydraulic blade tension
Saw wheel elevation is driven by motor
Conveyor is driven by hydraulic motor
|
Max. board/cant size |
11.8″
(W) x 9.8″ (T) |
|
Distance from upper blade to conveyor table |
.79″
– 6.7″ |
|
Distance from lower blade to conveyor table |
.47″
– 4.9″ |
|
Conveyor belt size |
11.2″
x 215.7″ |
|
Diameter of saw wheel |
28″ x 1″ wide |
|
Variable feed speed |
0
– 68 FPM |
|
Saw blade size |
168″ x 1″ x 2 pcs. |
|
Motor |
20 HP x 2 pcs. |
|
Gear box motor |
1/4 HP x 2 pcs. |
|
Dust hood |
4″ x 2 pcs. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...
AMXmachinery
EXTRACTOR CENTRIFUGO - MOTOR .20 HP, 208-230V, 1 FASE
PARTE: AMX-10138 - EXTRACTOR CENTRIFUGO - MOTOR .20 HP, 208-230V,
1 FASE
USADO - BUENAS CONDICIONES
MOTOR .20 HP, 208-230V, 1 FASE,
ABIERTO
MEDIDAS: 13” ANCHO X 10-3/4” FONDO
X 12” ALTO
ENTRADA REDONDA: 7-1/4” DIAMETRO
SALIDA RECTANGULAR: 9” X 8-3/4”
AMXmachinery
PARTE: 2NV-KDK-42DS - SECANTE DE MADERA - CAPACIDAD 35,000 PIES TABLA
PARTE: 2NV-KDK-42DS - SECANTE DE MADERA - CAPACIDAD 35,000 PIES TABLAUna estufa propia puede reducir los costos de almacenamiento, producción, transporte y dar valor agregado a su producción.Contactenos para una cotizacion detallada.
AMXmachinery
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH