Identificador: 1869
Abierta
Descripción
PARTE: 12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO - MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions Foot print of line 52' x 15'
Estimated Weight 10,000 Lbs (approx)
DESCRIPTION:
HPC Double Sided Automatic finger joint line
Station 1 squares one end and cuts initial finger joint
Station 2 squares the other end, cuts finger joint, and applies glue.
Station 3 assembles and clamps the pieces
Station 4 cuts to length from 8' - 20'
The information provided was gathered from literature, internet & physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DESCORTEZADORA 27"
PARTE # 11909 – DESCORTEZADORA NICHOLSON 27” A5AFabricación: 1996Tandem Ring w/Slitter Arm Barker240 FPMAir Seal Beater Ring440V 3PhaseSerial#6705Tandem RH 10 Roll.
AMXmachinery
MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"
PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”,
6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8"
USED - VERY GOOD CONDITIONS
North American
Gladu hydro-lock
6 wing
20 degrees
Interior diameter (bore): 1-13/16”
External diameter: 6” (150 mm)
Lenght 2-1/4” (57 mm)
Lenght 3” (75 mm)
Lenght 4” (102 mm)
Lenght 5” (130 mm)
Lenght 6” (152 mm)
AMXmachinery
CANTEADORA 6"
PARTE: 2MK-DE-1200-3 – CANTEADORA 6 PULGADAS – 1 HP, 1 o 3 FASESThe Wood Jointer DE.1200/3 has the thickness function adjustable, making cuts adjustment in small pieces of wood, plywood and MDF.Based on structural plate and table in die casting, its axis works with 3 knives, which ensures a quality finish to their final product.Has a depth of cut adjustment feature for precise cuts in small pieces of wood, plywood and MDF. Wood Jointer DE.1200/3 is easy to adjust and operate.2 Year Warranty....
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...