Identificador: 1249
Abierta
Descripción
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear Driven Spindles on 32mm Centers
Index Pins
3 HP Spindle Drive Motor, TEFC
10mm Bored Collets
(12) Right Hand, (11) Left Hand
12″ Throat Depth
60″ Back Fence With (4) Stops
24″ X 48″ Work Table Surface
(2) Spring Operated Hold Downs
Wired 3-Phase 240/480 Volt, 60 Hz.
Pneumatic Driven Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 78″ H and 740 Lbs
Options
R19F1 – Single Phase Machine
An upgrade to the R113, this unit is foot pedal operated. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2AM-U-400 - ARMADORA DE MARCOS - SEMIAUTOMATICA
PARTE:
2AM-U-400 - ARMADORA DE MARCOS - SEMIAUTOMATICANUEVA CON GARANTIAThe U-400 has been designed for ease of operation and is particularly well suited for joining large frames up to 5 ½” (140mm) in width.Supplied with a tilting floor stand, the machine can be operated from the front or back and has a single stage pneumatic foot pedal that activates the Horizontal Clamp, securing moulding during the joining process.After the framer sets the two position stops for measuring the max distance...
AMXmachinery
PARTE: 12321 - DOBLADORA DE CORTINA - 6'6" x 10 GA
PARTE: 12321 - DOBLADORA DE CORTINA
- 6'6" x 10 GA
USADA - BUENAS CONDICIONESModel no. QHD-6020Bending capacity:
6'6" x 10 ga. mild steelTonnage
capacity: 70
tonsOverall length of bed & ram: 80"Distance between housings: 61"Stroke:
6.3"Open
height:
12.2"Throat
depth:
13"Width of
bed:
4.9"Speeds
approx....
AMXmachinery
PARCHADORA RAINMAN
PARTE: 11758 - PARCHADORA RAINMAN
7 - PARCHADORA. MAQUINA
PARCHADORA RAINMAN CON DIMENSIONES DE PROCESO DE 0.6 MM A 2.5 MM DE GROSOR,
EQUIPADA CON MOTOR DE 5 HP Y MESA AJUSTABLE A DIFERENTES MEDIDAS DE DIAMETRO DE
CHAPA PARA PARCHAR.
AMXmachinery
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12Usada – Buenas condicionesManufacturer’s Specification 15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to bla...