Identificador: 118
Abierta
ID de articulo : # 118 se ha agregado a su lista de deseos.
Descripción
PARTE # AMX-CO-001 - MESA COLECTOR DE ASERRIN - CUBIERTA 45" X 31"
Nueva con garantia
Motor 3/4 HP, 120V, 1 Fase, 60 Hz
Medidas Maquina: 45-1/2" largo x 31-1/4" ancho x 35" alto
Turbina y filtros interiores
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 12” - DAYTON
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 12” - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS MOTOR NUEVOSMedidas totales: 22” ancho x 15”
fondo x 12” altoDiámetro aspas: 12”Marca DaytonModelo: 4C659A
Motor: ¼ HP,
1725 RPM, 115/230V, 4.6/2.3 Amp, 1 faseVideo: https://vimeo.com/870515251
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5”
PARTE: 2ST-4DCNC - SIERRA
ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5” TAMANO HASTA 360” X 120”Motor 7.5 HP
NUEVA CON GARANTIASimilar to Control above, plus (except):- Base size 7’ 4” x 17’ 4” cut capacity (9’
10” cut length via CNC control); up to 10’ x 30’ capacity available- Available options include: precision panel
lifters, programmable panel pusher, automatic saw beam positioning,
scoring, EPS.X motorized stop, simple on-screen
o...