Identificador: 1783
Abierta
ID de articulo : # 1783 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2CK-TA12
Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado arbors and table inserts. Driven by a powerful 5HP motor it can make the cuts you need effortlessly.
- Heavy-duty cast iron table is precision ground for accuracy & precision
- Industrial strength cast iron saw carriage and trunnion for vibration free cutting
- 50” capacity T-square rip fence assembly locks on front rail for a precise parallel reference to the saw blade
- Right tilt blade to 45o
- Dual Inch/Metric scale guide rail on rip fence with magnifying glass for easy visibility
- Miter gauge with two miter slots in the table
- Comes with dado arbor & dado table insert
KEY ADVANTAGES
- Rugged machine frame construction provides maximum stability and reduced vibration
- Saw guard with built in splitter and safety anti-kickback unit
- 1” standard and 5/8” dado arbor included along with appropriate cast iron table inserts
- Handwheel adjustment for blade height and tilting adjustments which can be locked in place
- CSA / UL approved magnetic switch
|
Saw Blade Diameter |
12″ |
|
Max. depth of cut at 90° |
4″ |
|
Max. depth of cut at 45° |
2 ¾” |
|
Arbor diameter |
1″ |
|
Dado arbor diameter |
5/8” |
|
Arbor speed |
4000 RPM |
|
Table size |
48″x30″ |
|
Table height |
34 ¼” |
|
Max. rip to right of blade |
50″ |
|
Motor |
5HP |
|
Electrical |
230/3/60 = 15.2 Full Load Amps |
|
230/1/60 = 28 Full Load Amps |
|
|
Net weight |
572 lbs |
|
Gross weight |
704 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 2''
PARTE: 2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 2''3 HP Motor, rated at 220V, three phase. Gear driven manual positioning. 2” Dia. of roller shaft, 7-1/2” roller Dia.ISO 9001 certified2” schedule 40 pipe is the maximum bending capacity, 2.5” round tube 14 Ga. and 2” square tubeEasy to operate in two positions; vertically and horizontally on its backDRO - Digitally displays your exact position and ensures repeatabilityHeavy Duty 4HP AC main motor1 - Top forming roll (hydraulic driven)2 ...
AMXmachinery1
SIERRA MULTIPLE - 4 A 6 SIERRAS MOVIBLES
PARTE: 2CK-MRS610MFEATURESThe Main Frame is Cast IronHD Precision Straight Line Feeding caterpillar Chain typeFully Programmable Position sets or Infinitely variable foot pedal position setUser friendly Touch Screen controlQuick Saw Blade positioning by Servo MotorBlade positioning by Electronic Joystick Control (Efficient & Quick) or the touch screen controlsEquipped to shift 4 saws independently or 2 saw per shifter (optional as a cluster) on the with a single or bank of saws on the inside or ...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
SIERRA ESCUADRADORA - 5 PIES
PARTE: 2CK-P30Is the ideal solution for customers looking for the precision and convenience of a sliding table saw but have limited floor space and smaller cutting requirements. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (¾ HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displa...