Identificador: 1798
Abierta
ID de articulo : # 1798 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-C12RSH
Is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
- Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut.
- Maintenance-free chain track with the use of a reliable mechanical lubrication system.
KEY ADVANTAGES
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
|
Saw arbor diameter |
1″ |
|
Saw blade diameter |
10 – 12″ |
|
Saw arbor speed |
4500 rpm |
|
Feed Speeds – variable |
50 to 120 FPM |
|
Maximum workpiece thickness |
3.34″ (12″ blade) |
|
Minimum workpiece length |
8″ |
|
Glue line guarantee |
10’ (+/- 0.0098” or 0.25mm) |
|
Distance between saw and column |
18″ |
|
Arbor motor |
15 HP |
|
Feed motor |
1 HP |
|
Electrical |
46 amps (230V); 23 amps (460V) |
|
Table size |
39″ x 57″ |
|
Table height |
31-7/8″ |
|
Dust port size |
4″ |
|
Net weight |
2,090 lbs |
|
Machine dimensions |
68” x 46” x 62” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - VERTICAL - 25 X 35 PULGADAS
PARTE: 2TA-WG-2535V - ASTILLADORA - VERTICAL - 25 X 35 PULGADASFeatures:A specially designed with the push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allow...
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
AMXmachinery1
SIERRA CINTA - REASERRADORA - 24 PULGADAS
PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenanc...
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 10 HP
PARTE: 2CK-OES512DIs the ideal edge sander for demanding applications for production use. Equipped with a 12” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. The OES512D is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and full utilization of the sanding belt. The dual tables also allow for two operators to be working on the mach...