Identificador: 1856
Abierta
ID de articulo : # 1856 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
Nuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mm
Quick to load
If you fire ware that is similar in size from one firing to the next, you can leave the shelves and posts stacked in the Dragon between firings. Reach into the kiln to remove the ware and reload the kiln for the next firing.
Since you are loading from the side, you can easily see how close the ware is to the kiln walls and the shelf above. Think of how much time this will save you.
Loading sculptures
Loading a tall sculpture into a top-loading kiln requires skill and care to avoid nudging the piece against the kiln wall. Loading sculpture into a front-loading kiln is faster and easier, because you can see what you are doing. There is far less risk of damaging the piece.
Exceptional element life
The Super Dragon exudes power. Its 21,600 watts heat the 27” wide, 27” deep, 36” high interior to cone 10 with ample power to spare. This results in long element life, because the elements do not “struggle” to reach high temperatures. Dropped, recessed grooves seat industrial-gauge elements.
Extra insulation saves energy and lengthens cooling. The 4” thick walls, top and door are made of 3” firebrick backed by 1” of ceramic fiber block insulation. The floor is 4 ½” thick firebrick. The extra insulation not only saves energy but also cools the kiln slowly without having to turn the elements back on. This gives the micro-crystalline structure and color of the glaze sufficient time for full development. Cool slowly to achieve dramatic shifts in glaze color such as iron reds and enjoy the richer look of gas firing. Create breathtaking pottery in the exciting Super Dragon.
Hinged switch box for easy maintenance
The ventilated switch box is generously slotted for air circulation for the long life of the electrical components. Hinged at the bottom, the switch box opens wide for easy maintenance. Open the box in seconds by merely removing two screws at the top. A folding support arm holds the box in the open position. There is plenty of working space around electrical components. A bank of built-in NEC/UL compliant high-amperage fuses protects the kiln and circuit wiring.
Doorway Clearance
The Super Dragon will fit through a 42” doorway.
Order the optional Orton Vent Master, which mounts to the back of the kiln. (Note: Door elements and stainless steel finish are not available on the Super Dragon.)
Super Dragon features
- Saves electricity with extra insulation
- Cone 10, 2350°F
- 3” insulating firebrick and 1” non-organic block insulation in walls, top and door: 4” total thickness
- 4 ½” thick firebrick bottom
- 15.18 cubic foot Interior: 27" wide x 27" deep x 36" tall
- Case temperature at cone 10: 170°F (compared to 400-500°F for standard firebrick kilns)
- UL/CUL & NEC compliant fuses for safety
Thermocouple with “special limit” wireThe thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards. |
Designed for productionParagon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period. |
Optional colors at no extra chargeBrighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section. |
Specifications
Max. Temperature: 2350F = 1287C
Amps: 90
Phase: 1
Watts: 21600
Nema: Direct
TUV tested to CSA and UL Standard 499: N
CE: N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type: Sentry Digital 12-key Ceramics
Voltage: 240
Hertz: 60
Kiln Type: Front Loading Square
Sides: 4
Chamber Volume: 15.30 CU.FT. = 433.25 litres
Chamber Width: 27.00 IN = 686 mm
Chamber Depth: 27.00 IN = 686 mm
Chamber Height: 36.00 IN = 914 mm
Outer Size: 51.50W x 43.00D x 78.00H Inches = 1308W x 1092D x 1981H mm
Ship Size: 64.00W x 67.00D x 87.00H Inches = 1626W x 1702D x 2210H mm
Ship Weight: 1550.00 Lbs. = 703.08 Kg.
Doorway Clearance Needed: 42.00 Inches = 1066.80 mm
Ship Method & Notations: This Kiln Ships Via Truck
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
INSERTADORA TACHUELAS
PARTE: AMX-AG-001 - INSERTADORA DE TACHUELASNueva con garantiaSe tiene que ajustar la manija a la posicion correcta.Para asegurar la correcta posicion baje el cabezal hasta que toque la mesa.Colocar las tachuelas adecuadamente es importante mientras usa la maquinaSostenga la tachuela con 2 dedos en la cavidad tan derecha como sea posible, con la practica este proceso se hace más fácil.Centre la placa en la base usando una tira pequeña de tape para que no se mueva.Es recomendable hacer agujero...
AMXmachinery
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
PARTE: 12306 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant t...
AMXmachinery
SIERRA ESCUADRADORA SCM MINIMAX S315WS
PARTE # AMX-10054 - SIERRA ESCUADRADORA – SCM - MINIMAX S315WSEN MUY BUENAS CONDICIONESLA MAQUINA ESTA COMPLETA Y YA DESARMADA LISTA PARA ENVIO EN SU TARIMA DE MADERAMOTOR: 5 HP, 230V, 60HZDISCO PRINCIPAL: DIAMETRO 12” (315 MM MAX) FLECHA 30 MM, 4200 RPM - INSTALADODISCO INCISOR: DIAMETRO 4-3/4” (120MM), Z 20, FLECHA 20 MM, 9300 RPM - INSTALADOLARGO CARRO: 3200 mm (126”)LARGO AGARRADERA DEL CARRO: 360 mm (14”)LARGO CARRO TOTAL: 3560 mm (140”)MODELO: 2005HECHA EN ITALIAPESO MAQUINA: 5...
AMXmachinery
DESCORTEZADORA 27"
PARTE # 11909 – DESCORTEZADORA NICHOLSON 27” A5AFabricación: 1996Tandem Ring w/Slitter Arm Barker240 FPMAir Seal Beater Ring440V 3PhaseSerial#6705Tandem RH 10 Roll.