Identificador: 2026
Abierta
ID de articulo : # 2026 se ha agregado a su lista de deseos.
Descripción
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - EVOLUTION - CAP. 169” X 66” X 3-1/8”
PARTE: 2ST-EVOLUTION - SIERRA
ESCUADRADORA VERTICAL - EVOLUTION - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
EVOLUTION
Same Features as Standard S, plus:
- Full-wood back support - great for thin
material, narrow strips and added dust control
- Digital measuring in both X&Y axes with
fine adjustment (auto in Y)
- 12” touchscreen and industrial PC for
electronic control of saw head pivoting, plunging & locking
- Automatic locking of saw beam at vertical
cutting...
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOS
PARTE: 2MK-FLEX - ENCHAPADORA DE
CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOSNUEVA CON GARANTIAGlue: Granulated Hot-Melt Low TemperatureGlue Temperature: 130º to 180º CTape height: 0-35/64” to 1-57/64”Tape thickness: 0.3 mm - 1 mmFeeder speed: 0 to 19 ft/minPower: 700 WMotor: 1 PhaseVolts/Amps: 127 V - 5,5 A or 220 V - 2,5 AWeight: 21 LbsPerfect for bonding edge tapes to curved pieces.The hand-held is perfect to applying edgebanding to concave and convex curved pieces. It works with...