Identificador: 224
Abierta
ID de articulo : # 224 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO COPIADOR – NAVAJA TRASERA – LOBO
PARTE # 11623 – TORNO COPIADOR – NAVAJA TRASERA – LOBO En buenas condiciones de opracionProduccion 4-7 piezas por minutoMotor 7.5 HP, 220/440V, 3 fases, 60 cyLOBO CP-168A Hydraulic Copy Lathe with hopper feed with automatic chucking, square or round stock can be hopper feed.This unit is designed to produce (4 - 7) pieces a minute.Equipped with 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change and 3 HP hydraulic motor.Features:Designed for the fast, effici...
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...
AMXmachinery
ALIMENTADOR AUTOMATICO – 3 RODILLOS - 1 HP
PARTE: 2EX-XF-30 – ALIMENTADOR AUTOMATICO – 3 RODILLOS - 1
HP
Nuevo con garantía
1 HP – 230V 1 FASE
1 HP – 230V 3 FASES (OPCIONAL 460V)
3 RODILLOS
4 VELOCIDADES CAMBIANDO COMBINACION ENGRANES
VELOCIDAD 13, 26, 36, 72 PIES POR MINUTO
ADELANTE Y ATRAS
RUEDAS 4-3/4″ x 2-1/4″
SUSPENSION ¾”
PESO 65 KG
AMXmachinery
LIJADORA DE 8 RODILLOS - QUICKWOOD
PARTE: 12299 - LIJADORA DE 8 RODILLOS
- QUICKWOOD
USADA -
BUENAS CONDICIONES
Technical
Specifications:
Throughfeed:
2-12 m/min.
(8)
spindles
300-1150
RPM spindle speed
3-16 RPM
rotation speed
540mm
spindle length
(6) dust
collection ducts 2100kg
Dimensions 2240 x 2630 x 2050 mm