Identificador: 247
Abierta
ID de articulo : # 93 se ha agregado a su lista de deseos.
Descripción
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALES
NUEVA CON GARANTIA
CARACTERISTICAS
220V/60HZ/3PH
1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP
2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP
3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP
4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HP
Feeding motor: 3Kw – 4 HP
Stepless variable feed speed 10-33m/min
Feed beam :0.75kW
Working width: 20-130mm
Working thickness: 8-100mm
Individual motor to each spindle to ensure maximum cutting(Standard)
Hard chrom treatment has been adopted for the durability of the work table surface(Standard)
Equip with short-piece gear box for the shortest length of 180mm
Lengthened-type side pressure roller at the infeed entrance for effectively prevent wood running deviation
Multi-section pneumatic adjustment is adopted to the conveying pressure system
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # SIL-DC-SE3200 - SIERRA ESCUADRADORA - 3200 MMNUEVA CON GARANTIAPeso760 KgAltura De La Mesa36" (914mm)Tipo De Empaque2 cajasCapacidad De Corte A 90º4"Capacidad De Corte 45º2-3/4”Diámetro Del Disco12”Rango De Inclinación Del Disco0° – 45°Motor Principal7 1/2 HP 220V, 60 Hz, 3 FasesMotor Del Disco Incisor1 HP 220V 60Hz 3 FasesDiámetro Del Disco Incisor4-3/4" (120mm)Diámetro Del Eje Incisor20 mmDiámetro Del Eje Principal1-3/16" (30mm)Velocidad Del Disco Principal2 (4000–600...
AMXmachinery
LIJADORA DE CEPILLOS – SLIPCON
PARTE:
12151 - LIJADORA DE CEPILLOS – SLIPCON
USADA – EN MUY BUENAS
CONDICIONES
- The patented combination of rollers and rotating / oscillating discs makes
the Perfection DBB 1350 sanding machine the ideal finishing solution for entry
doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames,
furniture parts and much more.
- The sander works equally well for whitewood sanding and stain/sealer or
primer sanding. Can be used with both traditional and UV cured coat...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...