Identificador: 2630
Abierta
ID de articulo : # 2630 se ha agregado a su lista de deseos.
Descripción
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
USADA – BUENAS CONDICONES
FISHER+RUCKLE FZX-28 Delta
Veneer crossfeed splicing machine with pre-glued veneer sheets
Veneer strip length (in fiber direction) 750 - 2800 mm
Veneer strip width (cross to fiber direction) 70 - 600 mm
Veneer strip thickness (depending on veneer) 0.3 - 1.5 mm
EC standards
Year 2001
400V/50Hz
Complete of:
- INTERMEDIATE CONVEYOR
The intermediate conveyor serves at the same time as buffer to avoid dead times during the deposit procedure.
Veneer widths (cross to fiber direction) 300 - 2000 mm-
- VENEER FACES TRIMMING AND REINFORCEMENT UNIT
- STACKING STATION
The veneers are discharged and deposited smoothly, without any mechanical load.
Veneer widths (cross to fiber direction) 300 - 2000 mm
Delivery EXW
Transport Not included
Includes loading on truck
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RECUBRIDORA DE MOLDURAS DUSPOH
PARTE # 11545 - RECUBRIDORA DE MOLDURAS - DUSPOHEn buenas condiciones de operacionCaracteristicas:15-3/4" Max. foil width, 3/4" to 23-1/2" max. panel material width with a min. length of 39", material thickness 1/4" to 3-1/2" max.Machine length 7,000 mm (22'9" for 16' material wrapping).
AMXmachinery
PROFILE KNIFE GRINDER
PART: 2TA-TG-9330-E - PROFILE KNIFE GRINDER
NEW WITH WARRANTYFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grinding center is never c...
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75”
PARTE: 2MA-800CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity
(Not included)30 mm Arbor diameter73.23" x 45.08" Table size27.75" Max crosscut length on 3/4"
thick material (90 deg)0 to 40.5" Rip capacity4.9" Max depth of cut19.68" Max cut length at 45 deg on right
side12.20" Ma...
AMXmachinery
SIERRA RADIAL AUTOMATICA
PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with
variable speed control
35 1/2 "
working height. Adjustable leveling feet.
NEW: Additional
guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...