Identificador: 2631
Abierta
ID de articulo : # 2631 se ha agregado a su lista de deseos.
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
AMXmachinery
Descripción
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.
NUEVO CON GARANTIA
24" wide cutterhead block, 24" wide x 36" deep inlet hopper.
15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.
Generates solid material into approximately 3/8" x 1" sizes.
A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic material, composites, paper, cardboard or any like materials that will fit into the hopper.
An automatic reverse switch is included to eliminate any jam by heavy solids like steel or metal objects placed into the hopper.
Options:
480 or 600 V
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO 2GM-BB-412-6HD 4 PIES LARGO x 12 Ga.2GM-BB-612-6HD 6 PIES LARGO x 12 Ga.2GM-BB-812-6HD 8 PIES LARGO x 12 Ga.2GM-BB-1014-6HD 10 PIS LARGO X 14 Ga.Standard Features- ISO 9002 certified- Large 1-9/16” beam opening, adjustable- 1” beam adjustment ( front and back )- Total pieces fingers assortment:- BB-412-6HD: 2”/1pc, 3”/4pcs, 4”/2pcs, 25”/1pc- B...
AMXmachinery
PISTOLA SAND BLASTER
PARTE: 1SIL-DC-A3071 - PISTOLA PARA SAND BLASTER ARENADO8 piezas incluidasManguera 10 piesPara presion 60-90 PSI
AMXmachinery
GUILLOTINA DOBLE HOJA
PARTE # 11931 - GUILLOTINA DOBLE HOJA - MONGUZZIMod. TRM 2L 2.600Capacidad de corte 2.700 mm.Ancho máx de corte 520 mm.Ordenador de corte con 99 programasNormas CEAño 2001
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"