PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK USADO - EN BUENAS CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads with two sided solid carbide knives• Digital electronic thickness adjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed roller before top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication�...

PARTE: 12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK USADO - EN BUENAS CONDICIONES Top cutterhead motor 30 HP 460 volts Helical cutterhead Bottom cutterhead motor 25 HP 460 volts straight knife cutterhead Feed motor 5 HP on spike carpet feed system 25 to 95 fpm Digital control panel Capacity 3/8” to 6-1/2” thickness Max lumber width 24” Min lumber length 15”

PARTE: 12378 - CEPILLO 2 CARAS - CAPACIDAD 30” - WHITNEY USADOMotores 15 y 10 HP

PARTE: - CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH USADO - BUENAS CONDICIONES Mfg: 2006 15" width capacity 6" height capacity Helical heads Top head 20HP Bottom head 15HP 20-90 FPM Motorized opening (1 HP) 460 volt 3 phase

PARTE: 11763 - CEPILLO NEWMAN 500 - 4 CARAS 11 - CEPILLO NEWMAN 500 - 4 CARAS

PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30” USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics Standard Specifications: - 32-3/8" wide x (3/8” to 6") thickness work-piece capacity - 13” minimum length x 2” minimum width work-piece - 50 HP, 230/460/3 top head motor - 50 HP, 230/460/3 bottom head motor - 6” diameter, 5,000 RPM solid steel cutterheads - Helical cutterheads with insert style knives - 10 HP 15 HP inverter-controlled feed motor, (30 to 80 ft/min...

PARTE: 12334 - CEPILLO 2 CARAS - CAPACIDAD 24” USADO - BUENAS CONDICIONES Standard Specifications: - 24" x 6" work piece capacity - 12" min. length, (6" min. butted) x 1/4" min. thickness - 30 HP upper cutter head motor, 20 HP lower head motor - Whisper helical carbide cutterhead, (1/2" max. depth of cut) - 1 HP platen/thickness elevator motor - 5 HP variable speed feed motor, (25 to 100 ft/min. feed speed) - 2" concentric chipbreakers with pressure rollers ...

PARTE: 12330 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” USADO - BUENAS CONDICIONES

PARTE: 12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD USADO - BUENAS CONDICIONES24" width cap. x 6" thickness cap.Upper spring loaded staggered hold down fingersTop/Bottom helical carbide heads30HP; 3PH upper cutterhead motorapprox 20HP; 3PH lower cutterhead motor5HP; 3PH variable speed feed motor with gear reducer1HP; 3PH platen elevation motor56" central distance between cutterheads4" solid steel power driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...

PARTE: 12328 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO USADO - BUENAS CONDICIONESFeatures gang rip and side head capabilities.  Additional technical specifications include... Planing & sawing width 24" maxThickness max. 4"Min. 1/2" Top Head: 4 knives 1/8" x 1-1/4" x 25"18 HP motorSpeed 5500 RPM5-1/4" cutting circle3/8" max chip removal7/8" profile depth max.8" dia. dust hood Bottom Head: 4 knives1/8" x 1-1/4" x 25"12 HP motor5500 RPM5-1/4" cutting circle3/8" max. chip removal...

PARTE: 12273 – CEPILLO 2 CARAS – NORTHTECH NT400XL USADO – MUY BUENAS CONDICIONES – SOLO POCAS HORAS DE USOCabezales Helicoidales218 hours on the machine43 HP total230 volt Belt drive

PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...

PARTE: 2EX-XP-224T – CEPILLO 2 CARAS – 24” ANCHO Nuevo con garantía 2 motores, 25 y 20 HP Factory wired 230 Volts, 3 Phase Vector Style 6 Row top cutter head for EP-224 with arch faced 15mm x 15mm x 2.5mm cutter tips on a shear angle Vector Style 6 Row Bottom cutter head for EP-224 with arch faced 15mm x 15mm x 2.5mm cutter tips on a shear angle   MAIN TECHNICAL FEATURES               2EX-XP-216T               2EX-XP-224T Top Motor H...

PARTE: 2TA-PL-18 - CEPILLO 2 CARAS - 18" ANCHOPARTE: 2TA-PL-24 - CEPILLO 2 CARAS - 24" ANCHOPARTE: 2TA-PL-38 - CEPILLO 2 CARAS - 38" ANCHOOPCIONES:CABEZAL CON CUCHILLAS EN ESPIRALCT-SCH-14T 14MM x 14MM - NAVAJAS PARA CABEZAL EN ESPIRAL CT-SCH-15T 15MM x 15MM - NAVAJAS PARA CABEZAL EN ESPIRALFEATURES:- Upper & lower Straight Cutterheads for accurate and powerful two sided planning in one pass.- Optional Auto digital thickness control for quickly and accrue set up.- The work table surface was pre...

PARTE # 1N-CP2-016 - CEPILLO 2 CARAS - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP2-020 - CEPILLO 2 CARAS - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP2-024 - CEPILLO 2 CARAS - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP2-029 - CEPILLO 2 CARAS - 29" ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTORES PRINCIPALES (2)5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1...