Identificador: 326
Abierta
Descripción
PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MM
Heavy duty construction provides vibration free operation. Easy to set up and adjust.
Manual raise, lower and tilt of main blade and scoring saw.
Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.
Sealed main shaft bearings (lubricated for life) with vibration dampening system.
Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.
Specially designed roller carriage, utilizing aluminum pro files for lighter weight.
Stable, torsion free cross slides with low resistance swinging support arm.
Extra attention paid to the sliding table mechanism, ensuring absolute rigidity of the entire sliding assembly.
Base welded from cold, rolled heavy gauge steel plate, providing a rugged assembly and long term accuracy of the entire machine.
Industrial grade, high power rated motor for long life and heavy duty performance.
Telescoping cross cut fence, extendable to the full 63” stroke of the sliding table. Fence can be utilized for up to 45 degree miter cutting.
All painted surfaces with special heavy grade priming and finish for long term protection.
All none painted aluminum surfaces, anodized
SPECIFICATIONS | LB-TS-P1600MA | LB-TS-P2500MA | LB-TS-P3200MA |
Sliding Carriage Dimensions | 63" x 14" | 98" x 13" | 126" x 13" |
Max. Cutting Length | 63" | 98" | 122" |
Ripping Capacity | 49" | 49" | 49" |
Saw Blade Inclination | 90° ~ 45° | 90° ~ 45° | 90° ~ 45° |
Maximum Depth of Cut at 90° | 3.3" | 3.3" | 3.3" |
Maximum Depth of Cut at 45° | 2.6" | 2.6" | 2.6" |
Main Saw Maximum Blade Dia. | 14" | 14" | 14" |
Saw Blade Shaft Dia. | 30 MM | 31 MM | 32 MM |
Blade Rotation Speed (RPM) | 2800/4000/5600 | 2800/4000/5600 | 2800/4000/5600 |
Saw Blade Motor Power | 5 HP | 5 HP | 7.5 HP |
Scoring Saw Blade Dia. | 125 MM | 125 MM | 125 MM |
Saw Blade Shaft Dia. | 20 MM | 20 MM | 20 MM |
Blade Rotation Speed (RPM) | 8000 | 8000 | 8000 |
Scoring Motor Power | 1 HP | 1 HP | 1 HP |
Saw Up & Down, Tilting Motor | MANUAL | MANUAL | MANUAL |
Power | 220V 3PH | 220V 3PH | 220V 3PH |
N.W. | 960 LBS | 1650 LBS | 1800 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURAS
PARTE: 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pai...
AMXmachinery
GUILLOTINA – JOSTING 2600 MM LARGO
PARTE: 12117 – GUILLOTINA – JOSTING 2600 MM LARGO
USADA – EN BUENAS CONDICIONES
Extra blade
3 phase 230v
30 inch
approximate automatic fence
Green laser light
on cut
Excellent working
condition
Video 1 https://vimeo.com/466952870
Video 2 https://vimeo.com/466953105
Video 3 https://vimeo.com/466953026
AMXmachinery
SIERRA MULTIPLE – MOTOR 60 HP – ALIMENTACION DE RODILLOS - NORTHTECH
PARTE:
12279 – SIERRA MULTIPLE – MOTOR 60 HP – ALIMENTACION DE RODILLOS - NORTHTECH
Como nueva, nunca fue instalada
Maquina completa con motores y controles
Alimentación con rodillos
AMXmachinery
CEPILLO 2 LADOS CABEZALES HELICOIDALES INSERTOS NORTHTECH
PARTE: 12074 – CEPILLO 2 LADOS – CABEZALES HELICOIDALES INSERTOS - 24" ANCHO - NORTHTECHUSADO - EN MUY BUENAS CONDICIONESUSO RUDOCABEZAL SUPERIOR 30 HPCABEZAL INFERIOR 25 HPMOTOR ALIMENTACION: 5 HPCABEZALES 5000 RPMVELOCIDAD VARIABLE 25 - 95 FT/MIN ESPESOR DE TRABAJO 10 - 155mm (3/8” - 6-1/2”)15” min working length - 24” maximum widthMANUFACTURA 2005FEATURES:Carpet feeding spike system with 1100 spikesMechanical variable speedDigital control panel with 3 amp metersChrome bed ...