Identificador: 355
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 3YH-YFC-18 – SIERRA TRONZADORA – 7.5 HP – SIERRA 18” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
● Cutting capacity (Thickness x Width)：2" x 12", 3" x 11", 4" x 10"
● Cycle speed：45 cuts/min
● Cycle operation：Pneumatic
● Saw blade diameter (Option)：ø18"
● Saw arbor diameter：ø1"/ 30mm
● Saw blade speed ：3600 rpm
● Dust exhaust diameter：ø4" x (1)
● Saw arbor motor：7.5HP / 10HP
● Table size：660X 690mm
● Net weight：350 kgs
● Gross weight：410 kgs
● Packing dimensions(LxWxH)：770x 780x 1350mm
FEATURES
● Table surface is precision ground, assuring cutting accuracy.
● The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
● Cycle speed is adjustable and up to 45 strokes per minute.
● Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
● Powerful 7.5HP (10HP) motor drive.
● T-clamp is easily adjusted for workpiece thickness variation.
● Convenient and fast sawblade replacement.
● Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA
USADA - BUENAS CONDICIONES
Motor 10 HP
AMXmachinery
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachinery
ENCHAPADORA
PARTE # 1RU-BI-AR-AKRON420AR - ENCHAPADORA DE CANTOS RECTOSGRUPO ENCOLADO, RETESTADOR, DESBASTADOR, ACHAFLANADOR deARISTAS INCLINABLE, GRUPO CEPILLO ROTATIVOAKRON 400 con Autómata de MANDORebordeadora monolateral automática para la aplicación y elaboración de los bordes planos en rollos (melamina, pvc, abs, contrachapado) y en tiras (tiras de madera, formica, chapeados, etc.).EQUIPO ESTÁNDARSistema de Control y Automata de Mando- Cuadro de mandos orientables en posición ergonómica.- ...