Identificador: 1142
Abierta
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 8 LITROS
PARTE: 2PG-CALDERA-XL - HORNO PARA CERAMICA, VIDRIO, METALES –
8 LITROSNew with warrantyFire porcelain, stoneware, china, ceramics, and decals in digital Caldera XL. Test glazes and glaze application ideas before running production quantities in a large studio kiln.You will not outgrow a small kiln even if you acquire a larger kiln later. Continue to use the Caldera XL for testing or for small projects. Carry it with you to seminars or on vacation; convenient hand lifts on the sides aid in mo...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 201 LITROS
PARTE:
2PG-TNF243 – HORNO PARA
CERAMICA, VIDRIO, METALES – 201 LITROS240V, 60 Hz, 48 amps, 1 faseCrystalline Glazes, Decals, Low-Fire Ceramics, Porcelain and StonewareDuring busy seasons when orders are backlogged, you will be grateful you own a dependable Paragon kiln such as the TnF-24-3. Studio owners call these kilns “real work horses.”Have withstood years of abuse in school environments. High school ceramics teachers fire these kilns unmercifully, without remorse. Yet the kilns ke...
AMXmachinery
PARTE: 12524 - CENTRO DE TRABAJO CNC - BIESSE ROVER A SMART 1532
PARTE: 12524 - CENTRO
DE TRABAJO CNC - BIESSE ROVER A SMART 1532
USADO – MUY BUENAS CONDICIONES
MFG 2019
FOTOS DE 18 DIC 2023
DISPONIBLE PARA INSPECCION TODAVIA
CONECTADO