Identificador: 1532
Abierta
Descripción
PARTE: 12310 - SIERRA ESCUADRADORA VERTICAL - ELCON
USADA - MUY BUENAS CONDICIONES
YMFG: 2005
Voltage: 230V 60Hz 3Ph
7-1/2 HP 4,200 RPM motor; 163" horizontal cutting capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO digital readout with 2 meters (78.75") magnetic band installed for horizontal positioning of the saw head; rigid welded box steel frame with (4) vertical cutting positions; round upper guide rail with concave bearings for smooth operation; equipped with panel transport rollers at base; segmented midway fence that is the full length of the frame; panel support for cutting small pieces; double cut plunge scoring system with push button control on plunge handle; automatic moveable panel support grid; pneumatic plunge of saw head; saw head is counter balanced with chain and safety cable; pneumatic saw head lock; (2) pneumatic panel clamps; vertical cut stop with micro adjustment; programmable rail for predetermined horizontal cuts; repeat rip guide; both english and metric scales; built-in dust shroud with pipe ready for dust collection; requires 90 PSI; (1) 4-3/4" dust collection connection requiring 1,900 CFM. Electrical connection requires 22 Amps at 230V 3-Phase; Machine footprint is 214-1/2" long x 106" high x 63" deep; Machine weight is 1,907 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KG
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KGPARTE: 1SIL-R-OXIDOALUM-80CH - OXIDO DE ALUMINIO- GRANO 80 - COSTAL 20 KG
AMXmachinery
ASERRADERO PORTATIL WOODMIZER LT15
PARTE # 10401 - ASERRADERO PORTATIL WOODMIZER LT15EN BUENAS CONDICIONES DE OPERACION
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBAPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADOPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOSNueva con garantiaDesigned for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.The brush, flap whee...
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...