PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90 USADA – MUY BUENAS CONDICIONES Incoming Lengths up to 248" (20') Widths 3/4" Min to 14-1/4" Max Thickness 3/8" Min to 4" Max Automatic Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be Stored. Input up to 200 Lengths per Cutting List is Possible Saw Motor 10HP Saw Blade Diameter 20-1/2" Swiveling Positioning Pusher Including Laser Photo-eye for...

PARTE: AMX-10151 - SIERRA CINTA - VOLANTES 14” - ½ HP - DELTA USADA - MUY BUENAS CONDICIONES Gomas de los volantes nuevos Todos los baleros nuevosMotor 1/2 HP, 110V, 1 FaseVolantes 14" diametroMedidas totales: 33" ancho x 17" fondo x 66" alto

PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50 USADA – MUY BUENAS CONDICIONESVoltage: 440/3/60Year: 2013 4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack...

PARTE: 12423 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER USADA - BUENAS CONDICIONESModelo Eco DS0Año de fabricación 2000.Multicanal para cortar 4 tablas al mismo tiempoIncluye 1 marco de hoja de 500 mm y 1 para hojas de400 mm 480 Volts 60Hz

PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260 USADA – MUY BUENAS CONDICIONESYear of Manufacture: 2018Condition: ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working dimensions:Cross section min./max 0.48"- 10.23" width; .25" - 3.15" thickness. Min. part length 5.5" cut. Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...

PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD USADA – MUY BUENAS CONDICIONES3 HP TEFC Dual Voltage MotorsWired for 460 Volt, 3 PhaseStart and E-Stop buttonsLeft head fixed, Right head manually position via hand crankMinimum Cut Length @ 90 = 13”Maximum cut length @ 90 = 100”Both heads rotate inward 90 to 45 degreeBoth heads tilt outward to 45 degree for compoundTwo hand anti tie down cycle control on pedestalBuilt in 3rd party hydro-checkPne...

PARTE: 12405-15 - SIERRA TROZADORA DE BRAZO 2 HP USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-14 - SIERRA DE BANCO DE 3 HP DISCO DE DIAMETRO DE 12” USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-13 - SIERRA DE BANCO MOTOR 3 HP DISCO DE DIAMETRO DE 12" USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-12 - SIERRA CINTA DE 1 HP CON VOLANTE DE 50 CMS USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12411 - SIERRA MULTIPLE - DE VAIVEN - NEVA USADA - BUENAS CONDICIONES

PARTE: 2MK-SC.650 - SIERRA DE BANCO PORTATIL CON LLANTAS – 1500W (2 HP), 110VNueva con garantíaMotor: 110 VMax. Cutting Depth: 90°: 80 mm (3,1″) – 45°: 55 mm (2,2″)Max. Saw Blade Diameter: 254 mm (10″)Table Dimensions: 825 (32,4″) x 500 (19,7″) mmTilting: 45°Extender Table: YesLaser Guide: YesDust Bag: YesPower: 1.500WSpeed: 5.000 RPMWeight : 34 kg (75 pounds)The Portable Table Saw SC.650.I MAKSIWA was designed to work with 254 mm blades (10”) and can cut wood and acrylic (sh...

PARTE: 12397 - SIERRA - RIP SAW - MATTISON USADA - BUENAS CONDICIONES Limpiada y Revisada Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-Crank Spindle Speed: 3,600 RPM

PARTE: 12392 – SIERRA OPTIMIZADORA – DIMTER WEINIG S90 USADA – MUY BUENAS CONDICIONES Incluye 2 empujadores para ClasificarYear of Manufacture: 2005Condition: GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0" LENGTHS.Working dimensions: Width 2" to 8"; thickness 3/8" to 2" and length 3' to 14-3/4" (4.5M).Motor: 10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed: Variable speed PUSH up to...

PARTE: 2ST-COMPACT - SIERRA ESCUADRADORA VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8” NUEVA CON GARANTIA• 5’5” x 10’2” cut capacity; 2-3/8” (60mm) cut depth• 5-1/4hp, 3-ph high-efficiency motor w/ electro-mechanical brake• One-piece full-length centershelf with moveable aluminum fingers• Integral full-length wood support area for small part support• Specially designed measuring stop for use w small partsFlexible and EconomicalThe STRIEBIG COMPACT is the entry leve...

PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGOThrough feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirementsEasy loading using hopper ensures maximum throughput capacity reachedSystem will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to buttSystem comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.Also available in differ...

PARTE: 11884 – SIERRA DIMENSIONADORA - RAYCO UsadaMedidas de envío quitando las 2 mesas laterales: 490 cm largo x 120 cm ancho x 160 cm alto, 2000 kg

PARTE: 12385 - SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP USADA - BUENAS CONDICIONES54" Dia. Wheels with 6-1/2" Face7" x 29'0" blade SizeAir Tensioning with Dial Adj. for Top WheelSelf Centering Feed Works that can also be preset to a sizesix 7" Dia. x 12" High Smooth Feed Rolls (Three Each Side of Saw Line) all with Individual Adjustment for Aligning with Saw Blade21" Max. Feed Roll Opening( 12" Outside Sawline, 9" Inside SawlineSteel Weldment Roll Cradle with Chrome Plate...

PARTE: 2OG-ECO - SIERRA MULTIPLE - DE VAIVEN - CORTE DELGADO - ECO-POWER NUEVA CON GARANTIAGlue-Ready Slats with Minimal Saw Kerf Waste The Power Plus Thin Cutting machine has a sturdy, solid cast iron base and is equipped with a 15kW (20 HP) main motor. Cuts solid wood blocks into glue able slats with minimal saw kerf waste.The machine can run products up to 250mm in height (10”). Provides a high performance and quality machine for the production of veneer slats. The machine can be...

PARTE: 1ES-050 - SIERRA TRIMMER - 2 MOTORES 5 HP CU - CAPACIDAD 24” - 60” NUEVA CON GARANTIA ABERTURA MINIMA: 24” ABERTURA MAXIMA: 60” 2 MOTORES 5 HP, 220/440V, 3 FASES C/U ESPESOR MAXIMO: 1-1/2” ANCHO MAXIMO: 4”